 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| www..com PALM TECHNOLOGY CO., LTD. The LCD(M) Specialist CONTACT ADDRESS : 10F-1, No.392, Yu-Cheng Rd., Tso-Ying Dist., KHH, Taiwan, R.O.C. Tel: 886-7-5587228 Fax: 886-7-5587229 E-mail: sales@palmtech.com.tw PART NO. : FOR MESSRS. : P MC1602C-SYR CONTENTS NO. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. COVER RECORD OF REVERSION GENERAL SPECIFICATION MECHANICAL DATA ABSOLUTE MAXIMUM RATINGS ELECTRICAL CHARACTERISTICS OPTICAL CHARACTERISTICS OUTLINE DIMENSION BLOCK DIAGRAM POWER SUPPLY FOR LCM ITEM PAGE 1 2 3 3 4 5 5 6 7 7 Ae 1/2E i 91.12.10 ACCEPTED BY : PROPOSED BY : o |ae www..com RECORD OF REVISION DATE PAGE SUMMARY PALM TECHNOLOGY CO., LTD. Tel:886-7-5587228 Fax:886-7-5587229 PMC1602C-SYR-1 PAGE: 2/7 www..com 3. General specifications 3.1 General specifications PLEASE REFER TO: "CUSTOMER ACCEPTANCE STANDARD SPECIFICATIONS (MS-10-12780)". 3.2 This individual specification is prior to general specifications 4. Mechanical data (1) NUMBER OF CHARACTERS ---------------- 16 CH * 2 LINE (2) MODULE SIZE ----------------------------------- 80.0 W * 36.0 H * 10.0 mm (3) EFFECTIVE AREA ------------------------------ 64.5 W * 16.0 H mm (4) CHARACTER PATTERN ----------------------- 5 * 7 DOTS + CURSOR (5) CHARACTER SIZE------------------------------ 2.96 W * 4.86 H mm (6) CHARACTER PITCH --------------------------- 3.55 mm (7) DOT SIZE------------------------------------------ 0.56 W * 0.66 H mm (8) DOT PITCH --------------------------------------- 0.60 W * 0.70 H mm (9) VIEWING DIRECTION ------------------------- 6 O'CLOCK (10) LCD TYPE --------------------------------------- STN.YELLOW-GREEN.REFLECTIVE PALM TECHNOLOGY CO., LTD. Tel:886-7-5587228 Fax:886-7-5587229 PMC1602C-SYR-1 PAGE: 3/7 www..com 5. Absolute maximum ratings 5.1 Electrical absolute maximum ratings ITEM POWER SUPPLY FOR LOGIC INPUT VOLTAGE STATIC ELECTRICITY SYMBOL VDD-VSS VI ------MIN. 0 VSS ------MAX. 6.0 VDD 100 UNIT V V V COMMENT ------------NOTE (1) NOTE (1): ELECTRO-STATIC DISCHARGE RESISTANCE IS TESTED BY CHARGING A 200PF CAPACITOR AND DISCHARGING IT BY CONTACT WITH A INTERFACE CONNECTOR PIN 5.2 Environmental absolute maximum ratings ITEM AMBIENT TEMPERATURE HUMIDITY OPERATING MIN. 0 MAX. 50 STORAGE MIN. -20 MAX. 70 COMMENT ------NO CONDENSATION 10~300Hz XYZ DIRECTIONS 1 Hr EACH 10 msec XYZ DIRECTIONS 1 TIME EACH ------- NOTE (2) NOTE (2) VIBRATION NOTE (3) ------- 0.5G ------- 2G SHOCK NOTE (3) CORROSIVE GAS ------- 3G ------- 50G NOT ACCEPTABLE NOT ACCEPTABLE NOTE (2) : Ta 50: 90% RH MAX. Ta 50: ABSOLUTE HUMIDITY MUST BE LOWER THAN THE HUMIDITY OF 90% RH AT 50. (80% RH AT 60) NOTE (3): 1G = 9.8 m/s 2 PALM TECHNOLOGY CO., LTD. Tel:886-7-5587228 Fax:886-7-5587229 PMC1602C-SYR-1 PAGE: 4/7 www..com 6. Electrical characteristics ITEM INPUT VOLTAGE OUTPUT VOLTAGE (H LEVEL) POWER SUPPLY CURRENT RECOMMENDED LCD DRIVING VOLTAGE SYMBOL VIH VIL VOH VOL IDD CONDITION ------IOH = -0.2 mA IOL = 1.2 mA VDD = 5.0V Ta = 25 MIN. 2.2 VSS 2.4 ------------- VDD = 5.0!0.25 V MAX. VDD 0.6 ------0.4 1.5 ------------------UNIT V V V V mA V V V TYP. ------------------------1.0 4.9 4.5 4.1 VDD-VO DUTY= Ta = 0 ------1/16 O = 10 Ta = 25 ------O = 0 Ta = 5 0 ------- NOTE (1): RECOMMENDED LCD DRIVING VOLTAGE MAY FLUCTEDUATE ABOUT ! 0.5V BY EACH MODULE. 7. Optical characteristics ITEM VIEWING ANGLE CONTRAST RATIO SYMBOL 2-1 K tr (rise) RESPONSE TIME tf (fall) CONDITION K =2.0 = 10 O =0 = 10 O =0 = 10 O =0 O O O Ta = 25 MIN. 30 3.0 ------------TYP. 40 4.0 200 300 MAX. ------------350 400 VDD = 5.0V UNIT NOTE deg. ------ms ms 2 2 2 2 NOTE (2): SEE CUSTOMER ACCEPTANCE STANDARD SPECIFICATION FOR DEFINITION OF OPTICAL CHARACTERISTICS. NOTE (3): UNDER NORMAL TEMPERATURE AND HUMIDITY IN A DARK ROOM. PALM TECHNOLOGY CO., LTD. Tel:886-7-5587228 Fax:886-7-5587229 PMC1602C-SYR-1 PAGE: 5/7 www..com 8. Outline dimension 0.56 3.55 2.96 0.04 56.21 11.5 Interface pin connection PIN NO. SYMBOL PIN NO. SYMBOL 1 VSS 9 DB2 2 VDD 10 DB3 3 VO 11 DB4 4 RS 12 DB5 5 R/W 13 DB6 ____ 0.66 0.04 5.56 6 E 14 DB7 7 DB0 15 NC 8 DB1 16 NC PALM TECHNOLOGY CO., LTD. Tel:886-7-5587228 Fax:886-7-5587229 PMC1602C-SYR-1 PAGE: 6/7 www..com 9. Block diagram VDD E RS ______ 16 16*2 LCD R/ W DB0 DB7 U1 40 4 40 VO VSS U2 DRIVER Display data address charts 1 2 01 41 3 02 42 4 03 43 5 04 44 6 05 45 7 06 46 8 07 47 9 08 48 10 09 49 11 12 13 44 14 15 16 0F 4F LINE 1 LINE 2 00 40 0A 0B 0C 0D 0E 4A 4B 4D 4E 10. Power supply for LCM VDD R LCM LCM VO VSS RECOMMENDED RESISTOR R: VDD-VO1.5V VDD-VO: LCD DRIVING VOLTAGE VR: 10K~20K VR +5.0V (VDD) PALM TECHNOLOGY CO., LTD. Tel:886-7-5587228 Fax:886-7-5587229 PMC1602C-SYR-1 PAGE: 7/7 |
Price & Availability of PMC1602C-SYR
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |